This is the 30W monocrystalline solar panel kit from Ecoboris
The 30W solar panel kit is ready to go.
This kit includes all that you need to start making electricity.
+ + +
The 30w solar panel lighting kit will bring light to any dark room with an off grid
Connect to a 12v DC battery (not supplied) and start making free off grid electricity.
Connect the light to the charge controller and you will have controllable light where
you need it It’s that straight forward and easy.
Position your 30W solar panel and attach with these anodised aluminium solar panel
mounts and start making free electricity from the sun.
The 30W solar panel has colour coded cables so connecting to the charge controller
is straight forward and easy.
Connect the charge controller to a battery (battery not included) with the 10Amp
battery connector cable with colour coded crocodile clips and terminal markings.
It really is that easy.
Panel Size 450 mm(h) x 550 mm(w) x 25 mm(d)
Peak Power: 30w
Open Circuit Voltage: 21.88V
Short Circuit Current: 1.85A
Power efficiency: >17%
Max Power Voltage: 18V
Max System Current: 1.71A
Max System Voltage: 600VDC
Tolerance ± 3%
The solar panel comes with,
2000mm of cable (2 metres)
Control type : PWM
Rated load current : 10 Amp
System voltage : 12V / 24V D.C.
Float charge voltage : 13.6
Over discharge voltage : 11.1
Over discharge return voltage : 12.6
Over voltage protection : 17 V
Low voltage indicator : 12 V
Direct charge : 14.4 V
The charge controller is not waterproof.
1 x 500mm 12v DC LED light with 2m cable
1 x 5M extension cable
2 metre twin red and black cable for connecting the10 Amp charge controller to a
complete with pre fitted inline fuse holder and 10 Amp fuse with a pair of hi Amp
4 x black anodised mounting brackets
4 x M6 X 10mm stainless steel hex screws
4 x M6 stainless steel flange nuts
Fixing screws are not included for attaching the mounts to a surface
only for attaching the brackets to the solar panel.
30W solar panel
solar panel mounts