The 20 Watt solar panel is ideal for trickle charging a battery or for providing
power to remote area with lights or a radio or electric fencing battery charging.
The 20W monocrystalline solar panel will provide power in bright sunshine and
low light conditions
Position your 20W solar panel and attach with these anodised aluminium solar panel
mounts and start making free electricity from the sun.
The 20W solar panel has colour coded cables so connecting to the charge controller
is straight forward and easy.
Connect the solar panel to a battery (battery not included) with the 10Amp battery
connector cable with colour coded crocodile clips and terminal markings.
It really is that easy.
Panel Size 510 mm(h) x 360 mm(w) x 20 mm(d)
Peak Power: 20w
Open Circuit Voltage: 21.88V
Short Circuit Current: 1.23A
Power efficiency: >17%
Max Power Voltage: 17.5V
Max System Current: 1.14A
Max System Voltage: 600VDC
Tolerance ± 3%
The solar module comes with,
2000mm of cable
Anodised aluminium alloy frame
Control type : PWM
Rated load current : 10 Amp
System voltage : 12V / 24V D.C.
Float charge voltage : 13.6
Over discharge voltage : 11.1
Over discharge return voltage : 12.6
Over voltage protection : 17 V
Low voltage indicator : 12 V
Direct charge : 14.4 V
The charge controller is not waterproof.
10Amp battery cable
2 metre twin red and black cable for connecting a 10 Amp charge controller to a battery.
complete with pre fitted inline fuse holder and 10 Amp fuse with a pair of hi Amp
4 x black anodised mounting brackets
4 x M6 X 10mm stainless steel hex screws
4 x M6 stainless steel flange nuts
Fixing screws are not included for attaching the mounts to a surface
only for attaching the brackets to the solar panel.
1 x 250mm light with 2M wire
1 x 5M extension wire
2 x light fitting clips and screws
The 20W solar panel kit is ready to go.
This kit includes all that you need to start making electricity.(Battery not included)