The 10 Watt solar panel is ideal for trickle charging a battery ( not included )
or for providing
power to remote area with lighting.
The 10W monocrystalline solar panel will provide power in bright sunshine and
low light conditions
Position your 10W solar panel and attach with these anodised aluminium solar panel
mounts and start making free electricity from the sun.
The 10W solar panel has colour coded cables so connecting to the charge controller
is straight forward and easy.
Connect the solar panel to a battery (battery not included) with the 10Amp battery
connector cable with terminal markings.
It really is that easy.
Panel Size 354 mm(h) x 290 mm(w) x 20 mm(d)
Peak Power: 10w
Open Circuit Voltage: 21.6V
Short Circuit Current: 0.61A
Power efficiency: >17%
Max Power Voltage: 17.5V
Max System Current: 0.57A
Max System Voltage: 600VDC
Tolerance ± 3%
The solar panel comes with,
2000mm of cable (2 metres)
Anodised aluminium frame
Control type : PWM
Rated load current : 10 Amp
System voltage : 12V / 24V D.C.
Float charge voltage : 13.6
Over discharge voltage : 11.1
Over discharge return voltage : 12.6
Over voltage protection : 17 V
Low voltage indicator : 12 V
Direct charge : 14.4 V
The charge controller is not waterproof.
2 metre twin red and black cable for connecting a 10 Amp charge controller to a battery.
complete with pre fitted inline fuse holder and 10 Amp fuse with a pair of hi Amp
1 x 250mm light with 2M wire
1 x Inline remote control
1 x 5M extension wire
2 x light fitting clips and screws
Operating voltage 12 V DC
Power consumption 3.4W / 0.28A
LED Type: SMD
4 x black anodised mounting brackets
4 x M6 X 10mm stainless steel hex screws
4 x M6 stainless steel flange nuts
Fixing screws are not included for attaching the mounts to a surface
only for attaching the brackets to the solar panel.
With this kit you will be able to bring light to any remote place.
This kit will provide everything you need to make electricity and light. (Battery